|
AM 50
|
 |
 |
| DESCRIPTION |
| |
The new Machining Center AM 10 for window-frames is the ideal solution for those who need the following: |
 |
high quality at low cost |
|
high output capacity |
|
best functionality and easiness of use |
|
safety and simplicity during operation |
|
excellent tooling capacity |
|
production of window-frames |
|
programmable by units or by batches. |
|
| PERFORMANCES |
| |
The Machining center AM50 for window-frames presents two sides: |
| |
a tenoning side, which allows the following: |
|
setting to length, turning around and entering into profiling in automatic mode for high output independently from the dimensions of frames |
|
table with linear interpolation used for making inclined tenons at the same speed as for straight ones |
|
the machine is equipped with 1 tenoning shaft having 600/650 mm. length |
|
splinter screen “Jolly” to prevent automatically any splintering on all tools without any need to change the counter-template |
|
large table for external profiling of window-frames |
| |
a profiling side, which allows the following: |
|
possibility of equipping the machine with 2 or 3 profiling shafts each having 600 mm. length |
|
possibility of equipping the machine with 1 left-hand vertical shafts |
|
possibility of equipping the machine with horizontal shafts over and under the table level |
|
automatic NC-controlled vertical positioning of the take-off wheels |
|
right-hand and left-hand guides with automatic NC-controlled positioning according to the job to be carried out. |
|
| ELECTRONIC CONTROL |
| |
The angular plant is provided with a modular multi-axis NC system of new design having a 2-PC architecture for controlling in real time all machine functions by means of man-machine dialog, LCD 14” monitor, alphanumerical keyboard, mouse, hard-disk, floppy-disk drive, USB port available. On request, CD-ROM drive and bar-code reader.
The NC and the “Wingrp” software allow easy and complete operations, such as: |
 |
|
Handling and programming of jobs: programming of the jobs is extremely simple and versatile. In fact, single pieces, complete cycles or large job orders can be programmed. |
|
Handling of work cycles: the operator must only load the workpieces, while the NC controls positioning of all units (saw-blade, tool-shaft, guides), workpiece turning around, workpiece passage to the profiling station and, if required, return of the workpiece |
|
Automatic handling of the job order: the NC has a socket for the connection to the network for entering the work data developed on a workstation in the office. The “Wingrp” software installed on the machine enables automatically defining of different frame-components to be manufactured by requiring only a few basic features (i.e. height, width, number of wings). The NC is able to read any ASCII files containing work data memorised on a floppy disk or CD-ROM. |
|
Handling of miscellaneous functions: the NC also controls the start-up of all motors of the machine, any opening of the dust-suction mouths, automatic lubrication of the work surfaces, any automatic loading of the workpiece and return of the finished piece. |
|
Diagnostics: the NC supplies a wide range of error and malfunction messages, information about pieces already manufactured or still to be done. Furthermore, a teleservice Modem can be installed.. |
| |
|
|
| TECHNICAL DATA |
| CUT-OFF SAW UNIT |
|
|
| Motor-power |
Kw |
3 (4) |
| Blade diameter |
mm |
400 (500) |
| Blade rotation speed |
rpm |
3.000 |
| Max. height of cut |
mm |
125 (160) |
| Blade dust extraction (outlet diameter) |
mm |
120 |
TENONING SPINDLE
(from 2 to 4 shafts) |
|
|
| Spindle diameter |
mm |
50 |
| Spindle length |
mm |
600 (650) |
| Vertical stroke |
mm |
550 (590) |
| Rotation speed |
rpm |
3.200 |
| Motor power |
kw |
7.5 (11) |
| Max. tool diameter |
mm |
320 (350) |
| Dust extraction (outlet diameter) |
mm |
150 |
| TENONING SLIDING TABLE |
|
|
| Work speed |
m/min. |
1/90 |
PROFILING SPINDLE
TIMED INFEED |
|
|
| Diameter |
mm |
50 |
| Spindle length |
mm |
600 |
| Vertical stroke |
mm |
550 |
| Rotation speed |
rpm |
6.000 |
| Rotation direction |
sx/dx |
|
| Motor power |
kw |
7.5 (11) |
| Base tool diameter |
mm |
130-140 |
| Max. tool diameter |
mm |
220 (240) |
| Dust extraction (outlet diameter) |
mm |
150 |
| PROFILING SPINDLE |
|
|
| Diameter |
mm |
50 |
| Spindle length |
mm |
600 |
| Vertical stroke |
mm |
550 |
| Rotation speed |
rpm |
6.000 |
| Rotation direction |
dx |
|
| Motor power |
kw |
7.5 (11) |
| Base tool diameter |
mm |
130-140 |
| Max. tool diameter |
mm |
220 (240) |
| Dust extraction (outlet diameter) |
mm |
150 |
| GLASS BEAD RECOVERY UNIT |
|
|
| Motor power |
kw |
2.2 |
| Blade diameter |
mm |
200 |
| Blade rotation speed |
rpm |
6.000 |
| Dust extraction (outlet diameter) |
mm |
80 |
| FEED SYSTEM |
|
|
| Motor power |
kw |
1.8 |
| Rubberized rollers diameter |
mm |
120 |
| DIMENSIONS OF THE PIECES |
|
|
| Min. length |
mm |
280 (230) |
| Max. length |
mm |
3.100 (6.000) |
| Min. height |
mm |
25 |
| Max. height |
mm |
125 (160) |
| Min. width |
mm |
45 |
| Max. width |
mm |
200 |
| NET WEIGHT standard machine |
kg. |
10.000 |
| |
|
|
| OPTIONS |
|
|
| UNIT FOR HARDWARE GROOVING |
|
|
| Motor power |
kw |
3 |
| Spindle diameter |
mm |
50 |
| Spindle length |
mm |
80 |
| 1 or 2 position automatic |
|
|
| vertical positioning |
|
|
| LOWER HORIZONTAL SPINDLE UNIT |
|
|
| Motor power |
kw |
2.2 |
| Spindle diameter |
mm |
35 |
| Spindle length |
mm |
50 |
| LEFT-HAND SIDE PROFILING SPINDLE |
|
|
| Spindle diameter |
mm |
50 |
| Spindle length |
mm |
130 |
| Vertical stroke |
mm |
200 |
| Horizontal stroke |
mm |
120 |
| Motor power |
kw |
5.5 |
| Base tool diameter |
mm |
130 |
| Max. tool diameter |
mm |
220 |
| Dust extraction (outlet diameter) |
mm |
150 |
|
|
|
|
|
|
Sitemap
