Colombo Angelo & Figli S.r.l.

Production » MACHINING CENTER FOR WINDOW FRAMES » AM 33 / AM33C / AM33 AF

Production

MANUAL TENONING MACHINETENONING ELECTRONIC MACHINEPROFILING ELETRONIC MACHINEMACHINING CENTER FOR WINDOW FRAMES AM 10 AM 22 AM 33 / AM33C / AM33 AF Composition machine Dettagli
AM 50 AM 60 CNC MACHINING CENTER

AM 33 / AM33C / AM33 AF

DESCRIZIONE

COLOMBO CNC machining centers feature all those assets which enable the user to quickly meet the requirements of a very challanging market.
They can handle big production orders as well as - and above all - single orders consisting of dissimilar-size small batches.
Heavy base weight and ribwork, large-size cast-iron columns and slides with ground antifriction wearproof slideways allow use of remarkably long tenoning and profiling spindles (up to 620 mm) which can be equipped with all necessary tooling for machining various window frame types.

ELECTRONIC CONTROL OF ALL MACHINE OPERATIONS

	Multi-axis modular COMPUTER with 10” graphic monochrome visual display unit or active matrix LCD graphic colour visual display unit for constant program check and workpiece display, dustproof alphanumeric keyboard by means of which data and cycle / program denomination can be freely entered.
	RS232 PORT and/or 3” 1/2 floppy disk drive, for connection to personal computer.
	Microprocessor PLC for controlling machine and diagnostic operations.
	Hard-disk available.
	User-friendly computer with simple yet complete operator’s menu.
	Freely programmable machining sequence of workpieces.
	It is possible to store over 500 work programs for machining the single workpiece completely.
	Automatic changeover of tool positioning according to stored program.
	Continuous axis electronic positioning of tools by means of centesimal encoder and ball screw.
	Tool positioning can be repeated with great accuracy.
	A 2 (or more than 2) sash frame can be machined completely by means of a single program or cycle.
	The work carried out or to be carried out is checked at all times even when the machine comes to a halt or to a stop with possibility of restarting.
	Sequential or batch production available.
	Electronic control of tenoner’s sliding table speed by means of a digital inverter; it is possible to adjust speed from 2 m/min. to 40 m/min. by means of keyboard and/or potentiometer.
	Software for creating and handling work schedules with automatic calculation of all measures. The same software can be installed also in a desk-top or portable computer for connection to the machine by means of RS232 port or by floppy disk.
	Graphic display of the operating tools which are being used while the workpieces are being machined.
	Print-out of the various calculated lengths available, so that workpieces can be easily prepared.
	Programmable automatic start and stop of motors.

TECHNICAL DATA

		AM 33	AM 33C	AM 33/AF
CUT-OFF SAW UNIT (A)
Motor power	Kw	3	3	3
Blade diameter	mm	400 (500)	400 (500)	400 (500)
Blade rotation speed	rpm	3.000	3.000	3.000
Blade horizontal movement	mm	130	130	130
Max. height of cut	mm	125 (160)	125 (160)	125 (160)
Blade dust extraction outlet diameter	mm	80	80	80
TENONING SPINDLE (B)
Spindle diameter	mm	50	50	50
Spindle length	mm	490 (620)	490 (620)	620
Vertical stroke	mm	480 (540)	480 (540)	540
Rotation speed	rpm	3.200	3.200	3.200
Standard motor power	kw	7.5	7.5	7.5
Max. tool diameter	mm	320 (350)	320 (350)	320 (350)
Dust extraction outlet diameter	mm	150	150	150
TENONING SLIDING TABLE
Table size	mm	600 x 1100	600 x 1100	600 x 1100
Motor power	kw	1.1	1.1	1.1
Work speed	m/min.	1/40	1/40	1/40
Rotating chipguard	positions	6	6	6
PROFILING SPINDLE / TIMED INFEED (C)
Diameter	mm	50	50	50
Spindle length	mm	120 (350)	120 (350)	490 (620)
Vertical stroke	mm	0 (320)	0 (320)	480 (540)
Horizontal stroke	mm	70	70	70
Rotation speed	rpm	6.000	6.000	6.000
Rotation direction		left-right	left-right	left-right
Standard motor power	kw	5.5	5.5	5.5
Base tool diameter	mm	110-140	110-140	110-140
Max. tool diameter	mm	220 (240)	220 (240)	220 (240)
Dust extraction outlet diameter	mm	150
PROFILING SPINDLE (D)
Diameter	mm	50	50	50
Spindle length	mm	490 (620)	490 (620)	490 (620)
Vertical stroke	mm	480 (540)	480 (540)	480 (540)
Horizontal stroke	mm	70	70	70
Rotation speed	rpm	6.000	6.000	6.000
Rotation direction		right	right	right
Standard motor power	kw	7.5	7.5	7.5
Base tool diameter	mm	110-140	110-140	110-140
Max. tool diameter	mm	220 (240)	220 (240)	220 (240)
Dust extraction outlet diameter	mm	150	150	150
GLASS BEAD RECOVERY UNIT (E)
Motor power	kw	2.2	2.2	2.2
Blade diameter	mm	200	200	200
Blade rotation speed	rpm	6.000	6.000	6.000
Dust extraction outlet diameter	mm	80	80	80
FEED SYSTEM
Motor power	kw	1.1 - 1.5	1.1 - 1.5	1.1 - 1.5
Rubberized rollers diameter	mm	120	120	120

NET WEIGHT	kg.	4.100	4.300	4.800

OPTIONS
- Automatic CNC positioning of workpiece length stop
- Automatic CNC positioning of left-hand profiling fence
- Floppy disk (3” 1/2)
UNIT FOR HARDWARE GROOVING (F)
Motor power	kw	3	3	3
Spindle diameter	mm	50	50	50
Spindle length	mm	100	100	100
Spindle horizontal stroke	mm	70	70	70
1 or 2 position automatic
vertical positioning
LOWER HORIZONTAL SPINDLE UNIT (G)
Motor power	kw	2.2	2.2	2.2
Spindle diameter	mm	35	35	35
Spindle length	mm	100	100	100
LEFT-HAND SIDE PROFILING SPINDLE (H)
Spindle diameter	mm	50	50	50
Spindle length	mm	120 (350)	120 (350)	120 (350)
Vertical stroke	mm	0 (420)	0 (420)	0 (420)
Horizontal stroke	mm	150	150	150
Standard motor power	kw	5.5	5.5	5.5

- Dust extraction outlet pneumatic closing
- Return feed conveyor (with rollers)
- Uprated motors
- +/- 60° tilting sliding table of tenoner
- It is possible to machine two workpieces at the same time

Data is not binding. The manufacturer reserves the right to make modifications without any obligation of forewarning.

Sitemap