Cut-off saw unit with CNC continuous axis horizontal positioning. It is possible to carry out programmable automatic tenoning with different depths on the same workpiece.
|
Workpiece tenoning with CNC continuous axis vertical positioning of tooling.
|
Two workpieces can be tenoned at the same time.
|
Automatic transfer of the workpiece (or workpieces) from the tenoning to the profiling side.
|
Workpiece profiling with CNC continuous axis vertical positioning of tooling. Glass bead recovery unit.
|
Sash external profiling on sliding table of tenoner.
|
Automatic transfer of sash from the tenoning to the profiling side.
|
Automatic transfer of sash from the tenoning to the profiling side.
|
CNC adjustment of the right-hand fence, according to the operating profiling spindle being used.
|
Left-hand fence of the profiling unit with CNC continuous axis vertical and horizontal positioning.
|
It is possible to cut-off and tenon tilted workpieces up to +/- 60°, with option for +/- 60° tilting worktable equipped with tilt electronic display.
|
Return feed conveyor (with rollers).
|
Cut-off saw blade, completely retractable inside its guard.Given that the 620 mm long counter-supported tenoning spindle can be equipped with all necessary tooling, no tool changeover is required when tenoning.
|
Upon request, the machine can be equipped with several 620 mm long spindles.
|
Given that the 620 mm long counter-supported spindle (or spindles) can be equipped with all necessary tooling, no tool changeover is required when profiling.
|
Control panel of the AM 33 – AM 33 C – AM 33 AF.
|
|
|
Sitemap
